Bioindicators for self-monitoring of sterilisers / autoclavesScope of delivery: 3 bioindicators and one transport control (autoclave up to 250l)For these reasons, the inspection and associated validation of autoclaves in healthcare facilities is regulated in various standards: - EN ISO 17665 - 1: 2006 - 11: This international standard defines the "Sterilisation of health care products - Moist heat - Part 1: Requirements for the development, validation and control of the use of a sterilisation process for medical devices". This standard is the successor to the following standards DIN EN 554 (58946 - 6) and represents the state of the art with regard to moist heat sterilisation processes for medical devices.- DIN EN 554: This standard specifies the "Sterilisation of medical devices - Validation and routine control for moist heat sterilisation". It is primarily used for quality assurance of sterilisation.  - DIN 58946-7: 2014 - 01: This regulates "Constructional requirements as well as requirements for the equipment and operation of steam sterilisers in healthcare".  - DIN EN 285: 2016 - 05: This standard for "Sterilisation - Steam sterilisers - Large sterilisers" specifies the essential performance requirements including the associated test methods.  - EN ISO 15883: Finally, this standard is a general "series of standards for washer-disinfectors" relating to equipment requirements and validation of processes for reprocessing. The bioindicators are added to the autoclaves or the autoclaving process. This is to provide evidence of successful germ elimination of the test germ "Geobacillus stearothermophilus". The sterilisation process is thus biologically tested by means of the HyMo box. After sterilisation, the bioindicators are removed and sent to the accredited Hohenstein laboratory for evaluation. Here, the bioindicators are examined in the laboratory. If the test germ "Geobacillus stearothermophilus" grows up, the sterilisation process is not valid and further observations of the sterilisation process must be checked with the operator after the evaluation with regard to the settings (e.g. temperature, programmes, dosage, etc.) and the functioning of the steriliser. Proof of successful germ elimination of the test germ in the laboratory, on the other hand, indicates a safe sterilisation process.The test result of the laboratory examination is sent to the operator as a report with an evaluation by the Hohenstein Laboratory and has the character of a self-monitoring to prove that the steam sterilisation process was successful. If the sterilisation is demonstrably successful, the process is safe in terms of reliably killing germs and the sterile items passing through can be described as sterile. Microorganisms can only penetrate the sterile barrier if it is damaged. The use of bioindicators for sterilisation should help to ensure the biological safety of the equipment. The bioindicators, as well as the sterilisation box (HyMo-Box), which is optionally available as a complete set, can be used in smaller facilities such as outpatient clinics and doctors' practices as well as in hospitals and clinics. With the step-by-step instructions, the responsible staff can carry out the test independently on a regular basis. The bioindicator test is a cost-efficient instrument for checking the sterilisation process, which is characterised by simple and uncomplicated handling. It gives you an insight into the effectiveness of the sterilisation process. The patient risk is considerably reduced by regular biological checks, possible surgery postponements or cancellations are eliminated because the instrument sieve intended for use in surgery can be used. With the swab plates, which are also in the optionally available HyMo box "Sterilisation Check", the low germ count can be checked on work surfaces that are used to prepare for sterilisation, for example wrapping in the sterilisation packaging. With the supplied results of the surface germ counts, cleaning-disinfection plans can thus also be adapted and updated.

cleaneroo Bathroom / WC Cleaner (red)Ideal for bathrooms and WCs (showers, ceramics, tiles, fittings, etc.) Removes bacteria, germs and organic soiling (e.g. grease, urine, blood) Completely non-toxic Biodegradable Also makes joints bright and clean again Very economical No fragrances or dyes, no preservatives, no alcohol

cleaneroo hand wash lotion (green)Ideal for hand hygiene Nourishing due to natural olive and sunflower oil No fragrances and dyes Vegan and animal-free No petrochemical additives Very productive

cleaneroo kitchen cleaner (yellow)Easily removes: fats, nicotine, proteins, caffeine, etc. Gentle on materials Completely non-toxic No fragrances or dyes Also ideal for floors (1:10) Very productive

cleaneroo maintenance cleaner (blue)No fragrances and dyes, no preservatives, no alcohol Vegan and not tested on animals Completely non-toxic for humans, animals and nature Very productive Anti-allergic Streak-free in half the time - no need to re-polish For all water-resistant surfaces NCP-bio certifiedThe cleaneroo starter set from cleaneroo includes a cleaneroo 500ml bottle, which is particularly suitable for use in the workplace. Also included is a cleaneroo-1000ml refill bottle, as well as two microfibre cloths and a soft cloth, which are also used in the professional sector. The spray attachment is included and can simply be screwed onto the cleaneroo-500ml bottle. 

cleaneroo maintenance cleaner (blue)No fragrances and dyes, no preservatives, no alcohol Vegan and not tested on animals Completely non-toxic for humans, animals and nature Very productive Anti-allergic Streak-free in half the time - no need to re-polish For all water-resistant surfaces NCP-bio certified

cleaneroo maintenance cleaner (blue)No fragrances and dyes, no preservatives, no alcohol Vegan and not tested on animals Completely non-toxic for humans, animals and nature Very productive Anti-allergic Streak-free in half the time - no need to re-polish For all water-resistant surfaces NCP-bio certified

cleaneroo maintenance cleaner (blue)No fragrances and dyes, no preservatives, no alcohol Vegan and not tested on animals Completely non-toxic for humans, animals and nature Very productive Anti-allergic Streak-free in half the time - no need to re-polish For all water-resistant surfaces NCP-bio certified

cleaneroo microfibre cloth box of 5 - the powerful one streak-free no need to re-polish without fragrances and dyes high-purity product 100% biodegradable

cleaneroo microfibre cloth box of 5 - the powerful one streak-free no need to re-polish without fragrances and dyes high-purity product 100% biodegradable

cleaneroo microfibre cloth box of 5 - the powerful one streak-free no need to re-polish without fragrances and dyes high-purity product 100% biodegradable

cleaneroo microfibre cloth box of 5 - the powerful one streak-free no need to re-polish without fragrances and dyes high-purity product 100% biodegradable

cleaneroo soft cloth box of 5 - the gentle one The cleaneroo professional wipes are characterised by a very high performance (professional quality). They are very durable and intended for long-term use. The special structure is ideal for cleaning all water-resistant surfaces. - for glasses, televisions, monitors, acrylic, piano lacquer- Very good dimensional stability- 95°C washing machine resistant- very good dimensional stability- silicone-free- long-lasting

The air purifier cleans the indoor air of viruses, bacteria, pollen, dust particles and suspended solids.Ideal for office, meeting room, reception, customer event and many other applications.Allergy sufferers can breathe freely and the risk of transmitting diseases via the air is reduced. Device information: 108 x 110 x 202 mm < 4W at full power Ambient temperature: 1°C - 40 °C washable electrostatic honeycomb filterPower supply 5 VDC via USB cable on the PC, or plug-in power supplyNoise level:A very low noise level < 30dBLifetime / Cleaning:The two UV-C LEDs last about three years at 12 hours air cleaning per day The particle tray can be cleaned by hand once a week

The LOTUS MINI system is a device for the production, dosing and monitoring of chlorine dioxide for the disinfection of water and is available as a system with a capacity of 8 g/h (192 g/day) and as a system for up to 20 g/h (480 g/day). Chlorine dioxide is produced by the acid-chlorite process from diluted hydrochloric acid (HCl 9%) and sodium chlorite (NaClO2 7.5%). Chlorine dioxide production by LOTUS MINI can be controlled according to the flow rate of the water or according to a predefined setpoint. No chlorine dioxide is stored or saved, so neither chlorine dioxide gas nor concentrated solutions are produced outside the process application. LOTUS MINI is designed so that chlorine dioxide is generated in a special reaction chamber. Safety is ensured by multifunction valves at the injection points in the reaction chamber. The starting chemicals are stored in tanks and fed into the reaction chamber via suction lances. Integrated fill level sensors stop the pumps automatically when the tanks are empty. The Lotus Mini system is equipped with the following components: The Lotus control unit Dosing pumps for HCI (red) and NaCIO2 (blue) A pump for dilution water (grey) 3SEFL flow sensors to ensure increased safety An MFKT/V multifunction valve that regulates pressure and safety and acts as an antisiphon and drain valve A reaction chamber Injection valves 2 suction lances Advantages: Reaction under atmospheric pressure High stability of the chlorine dioxide solution No loss of CIO2 due to closed reaction chamber Use of diluted chemicals Functions: Immediate CIO2 production Proportional CIO2 dosing Flow monitoring input (flow alarm) Tank level monitoring (level alarms) Water meter connection Standby input Real-time production data Monitoring of pumps and flow sensors (SEFL) Continuous data storage with system data log (logbook in the menu) ERMES communication mA output Display of the next service date Optional USB data protocol Optional Ethernet module Optional internal GSM/GPRS modem Characteristics: CIO2 concentration: 2g/l Dosing pumps for HCI (red), NaCIO2 (blue) and dilution water (grey) 3 SEFL control sensors for monitoring pump dosing MFKT/V multifunction valve for pressure and safety, as antisiphon and drain valve Reaction chamber made of PVC Housing made of ASA (acrylonitrile-styrene-acrylate copolymer) Protection class IP65 (NEMA4x) for the LOTUS control unit and pumps Rotary control for easy programming Operating temperature: 0/45°C (32/110°F)

The LOTUS MINI system is a device for the production, dosing and monitoring of chlorine dioxide for the disinfection of water and is available as a system with a capacity of 8 g/h (192 g/day) and as a system for up to 20 g/h (480 g/day). Chlorine dioxide is produced by the acid-chlorite process from diluted hydrochloric acid (HCl 9%) and sodium chlorite (NaClO2 7.5%). Chlorine dioxide production by LOTUS MINI can be controlled according to the flow rate of the water or according to a predefined setpoint. No chlorine dioxide is stored or saved, so neither chlorine dioxide gas nor concentrated solutions are produced outside the process application. LOTUS MINI is designed so that chlorine dioxide is generated in a special reaction chamber. Safety is ensured by multifunction valves at the injection points in the reaction chamber. The starting chemicals are stored in tanks and fed into the reaction chamber via suction lances. Integrated fill level sensors stop the pumps automatically when the tanks are empty. The Lotus Mini system is equipped with the following components: The Lotus control unit Dosing pumps for HCI (red) and NaCIO2 (blue) A pump for dilution water (grey) 3SEFL flow sensors to ensure increased safety An MFKT/V multifunction valve that regulates pressure and safety and acts as an antisiphon and drain valve A reaction chamber Injection valves 2 suction lances Advantages: Reaction under atmospheric pressure High stability of the chlorine dioxide solution No loss of CIO2 due to closed reaction chamber Use of diluted chemicals Functions: Immediate CIO2 production Proportional CIO2 dosing Flow monitoring input (flow alarm) Tank level monitoring (level alarms) Water meter connection Standby input Real-time production data Monitoring of pumps and flow sensors (SEFL) Continuous data storage with system data log (logbook in the menu) ERMES communication mA output Display of the next service date Optional USB data protocol Optional Ethernet module Optional internal GSM/GPRS modem Characteristics: CIO2 concentration: 2g/l Dosing pumps for HCI (red), NaCIO2 (blue) and dilution water (grey) 3 SEFL control sensors for monitoring pump dosing #BBD0E0 »

This injection valve made of polyvinylidene fluoride (PVDF), which is designed for all emec dosing systems, is screwed into the pipe and is suitable for dosing both chlorine and pH minus. emec LOTUS MINI injection valve 1/2" - 4 x 6 PVDF+FP+CE 

This injection valve made of polyvinylidene fluoride (PP), which is designed for all emec dosing systems, is screwed into the pipe and is suitable for dosing both chlorine and pH minus. LOTUS MINI injection valve 1/2"- 4x6 (PP+EP+CE) Opening pressure: 0.3 bar

This injection valve made of polyvinylidene fluoride (PVDF), which is designed for all emec dosing systems, is screwed into the pipe and is suitable for dosing both chlorine and pH minus. LOTUS MINI injection valve 1/2"- 4x6 (PVDF+FP+CE+C276) Opening pressure: 3 bar

This injection valve made of polyvinylidene fluoride (PVDF), which is designed for all emec dosing systems, is screwed into the pipe and is suitable for dosing both chlorine and pH minus. LOTUS MINI injection valve 1/2" - 6x8 PVDF+FP+CE+C276, 0.3 bar

This injection valve made of polyvinylidene fluoride (PVDF), which is designed for all emec dosing systems, is screwed into the pipe and is suitable for dosing both chlorine and pH minus. emec LOTUS MINI injection valve 1/2" - 6X8 PVDF+FP+CE + extension 10CM

Dosing lance made of PP (polypropylene) Precise dosing is essential, especially when the dosing pump has to work below the liquid level.  The high-quality Emec LINI chemical injection lance offers the ideal solution for industrial requirements. Conventional injection valves can cause problems such as crystallisation and chemical deposits, which are effectively avoided by the injection lance.  In addition, the unique design of the injection lance allows easy removal of the injection point, especially in pressurised systems, thanks to the optional non-return valve. Area of application: The EMEC LOTUS MINI LINI-D ½" is particularly suitable for applications where precise dosing is required, such as water treatment. Materials: Body: - The dosing lance is made of PP (polypropylene), a high-quality plastic O-rings and lip seal: These are made of EPDM (ethylene propylene diene rubber) Maximum flow rate: The dosing lance can achieve a flow rate of up to 10 litres per hour. Immersion depth: The immersion depth of the lance is variable: 20 - 160 mm Operating range: The dosing lance can be used at a maximum pressure of 16 bar and a temperature of 25°C (or 2 bar at 130°C). Process connection: The dosing lance has a ½" process connection Hose connection: the hose connection is 4x6 mm Dimensions: Width: 12 cmLength: 78 cmWeight: 800g

Precise dosing is essential, especially when the dosing pump has to work below the liquid level.  The high-quality Emec LINI chemical injection lance offers the ideal solution for industrial requirements. Conventional injection valves can cause problems such as crystallisation and chemical deposits, which are effectively avoided by the injection lance.  In addition, the unique design of the injection lance allows easy removal of the injection point, especially in pressurised systems, thanks to the optional non-return valve. Area of application:The EMEC LOTUS MINI LINI-D ½" is particularly suitable for applications where precise dosing is required, such as water treatment.Materials:  Body: - The dosing lance is made of PP (polypropylene), a high-quality plastic  O-rings and lip seal: These are made of EPDM (ethylene propylene diene rubber) Maximum flow rate: The dosing lance can achieve a flow rate of up to 10 litres per hour.Immersion depth: The immersion depth of the lance is variable: 20 - 160 mmOperating range: The dosing lance can be used at a maximum pressure of 16 bar and a temperature of 25°C (or 2 bar at 130°C).Process connection: The dosing lance has a ½" process connectionHose connection: the hose connection is 4x6 mm Dimensions:  Width: 12 cm  Length: 78 cm  Weight: 800g

Precise dosing is essential, especially when the dosing pump has to work below the liquid level.  The high-quality emec LINI chemical injection lance offers the ideal solution for industrial requirements. Conventional injection valves can cause problems such as crystallisation and chemical deposits, which are effectively avoided by the injection lance.  In addition, the unique design of the injection lance allows easy removal of the injection point, especially in pressurised systems, thanks to the optional non-return valve. Area of application: The EMEC LOTUS MINI LINI-V ½" is particularly suitable for applications where precise dosing is required, such as water treatment. Materials: Body: - The dosing lance is made of PVDF (polyvinylidene fluoride), a high-quality plastic with high resistance to chemicals. O-rings and lip seal: These are made of FKMB (Viton) Maximum flow rate: The dosing lance can achieve a flow rate of up to 10 litres per hour. Immersion depth: The immersion depth of the lance is variable: 20 - 160 mm Operating range: The dosing lance can be used at a maximum pressure of 16 bar and a temperature of 25°C (or 2 bar at 110°C). Process connection: The dosing lance has a ½" process connection Hose connection: the hose connection is 6x8 mm. Dimensions: Width: 12 cm Length: 78 cm Weight: 800g